Materials & installation
Specifications below are for the pilot acrylic design and remain provisional until production testing is complete.
Material
6mm cast acrylic, reverse-printed with white backing, contour-cut.
Polished edges, printed on the reverse face so the surface is protected.
Clean with a soft dry cloth. Avoid solvents and direct heat.
Sizes
| Size | Finished | Lead time |
|---|---|---|
| Small — 12" × 16" | 30 × 40 cm | ~9 working days |
| Medium — 18" × 24" | 45 × 60 cm | ~12 working days |
| Large — 24" × 36" | 60 × 90 cm | ~15 working days |
Hanging your piece
- Tape the included paper template to the wall and check it is level.
- Mark the four standoff positions and drill using fixings suited to your wall.
- Screw in the standoff bases, place the panel, then tighten the caps by hand.
- For the separate raised name, use its own template so spacing matches your chosen artwork.
- In children's rooms, mount out of reach of cots and beds.